Realme GT Neo 3 RMX3561 Stock ROM Firmware (Flash File)

Realme GT Neo 3 RMX3561 Stock ROM Firmware

Realme GT Neo 3 RMX3561 Stock ROM Firmware is now available for download and You can download it below. by using this firmware you can solve all software Issues within your Realme GT Neo 3 RMX3561 such as hang-on Logo, FRP lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash, etc.

On this page, you will find the direct link to get the official Realme GT Neo 3 RMX3561 Stock ROM Firmware (flash file) on your computer. The Firmware comes as a zip package and contains the original Firmware, Flash Tool, Driver, and How-to Flash Manual.

Note:

  • make a backup before the Process
  • it will erase all your data Including Internal Storage

Firmware Information:

  • Device Name – Realme GT Neo 3 RMX3561
  • ROM Type – Full ROM
  • SoC – Mediatek
  • OS – Android 12
  • Password – null
  • Root Access – No
  • Size –
  • Region –
  • Firmware Version – A.09

Downloads Links:

Available firmware:

  • RMX3561export_11_C.12_2022110919150157:¬†Download
  • RMX3561export_11_A.09_2022060422190000:¬†Download
  • RMX3561GDPR_11_A.13_2022071900440000: ¬†Download
  • RMX3561export_11_A.13_2022071900480000:¬†Download

OTA Packages:

How to Flash Realme GT Neo 3 RMX3561 Stock ROM Firmware Via Realme Flash Tool:

How to use Realme Flash Tool

How to Install Stock Firmware on Realme GT Neo 3 RMX3561:

  • unpack downloaded Firmware¬†using this tool
  • Install Mediatek Vcom¬†driver¬†on¬†Your computer.
  • disable SLA Authentication¬†(if not disabled You will face a BROM error or flash tool Require a Authorized account/ID)
  • Download & Extract smartphone Flash¬†tools¬†on your computer
  • from the flash tool folder¬†Run flash_tool.exe
  • Go to¬†Download¬†tab¬†Click Scatter¬†and¬†Load Scatter File¬†from¬†ROM folder
  • Repeat Process and load DA and Auth file too
  • Select ‚ÄėDownload only‚Äė Click ‚ÄėDownload‚Äô¬†&¬†connect Your switched off Phone by pressing volume up and down key¬†(if no usb device then you have to do test point)
  • You will see a Yellow flashing bar. once done unplug device & switch it ON

Related

Leave A Reply