OMIX X5 Stock Rom Firmware

The Omix X5 smartphone comes with a 6.51-inch screen size. It features 4GB RAM, and Unisoc T310 is getting power from the processor. Take pictures with a 13-MP Camera

The OMIX X5 stock ROM firmware is now available for download. The flash file can be used to fix issues like hang-on logo, FRP lock, fast boot mode, display blank or white after flash, dead recovery, dead after flash, etc.

On this page, you will find the direct link to get the official OMIX X5 Stock ROM Firmware (flash file) on your computer. The firmware comes as a zip package and contains the original firmware, flash tool, driver, and how-to flash manual.


  • Make a backup before the Process
  • It will erase all your data, Including Internal Storage

Firmware Information about the OMIX X5 Stock ROM Firmware:

  • Device Name: OMIX X3
  • ROM Type: Full ROM
  • SoC: unisoc
  • OS: Android 12
  • Password: Null
  • Size:
  • Region:
  • Firmware Version:
  • File Name:

Download links for the OMIX X5 stock ROM firmware:

Flash Tools

How to Install Stock Firmware on OMIX X5

  1. Unpack Firmware: after downloading the firmware from above links extract the zip file using 7z.
  2. Install Mediatek Vcom Driver: Install Mediatek driver on your computer which make a communication between your system and the device you are flashing.
  3. Disable SLA Authentication : next you have to disable serial link authentication in order to fix any type of flashing error, you can do it by following this guide above
  4. Run Flash tool: Enter the flash tool folder and run the flash_tool.exe.
  5. Connection Configuration – UART 921600: Navigate to the connection settings by clicking option/connection and set the configuration to Bound rate 921600. setup it like the below image
  6. Select Scatter File: In the Download tab, click ‘choose’ in front of scatter-loading file & in the Popup windows select scatter file from ROM folder
  7. Select DA and Auth File: repeat the same process and select DA and Auth File from ROM File
  8. Download Mode Selection: from the dropdown menu, select ‘Download Only’ option which prevent flash tool to wipe any nvitems.
  9. Initiate Download: Now final step, Click  ‘Download‘ button to start the flashing process
  10. Connect Device: I am assuming that the device already connected, as we connect it during the SLA Disable Process. if the device not connected, hold volume up down button and connect it (make sure it’s in power off mod)
  11. Flashing Progress: once the flashing process started, monitor the yellow flashing process by watching it, Once flashing done, disconnect device, it will start automatically
  12. Setup Device: once the device start successfully setup it by following the screen instructions.

Other Flash Tools


Leave A Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.