OnePlus Nord 2T CPH2399 Stock ROM Firmware

OnePlus Nord 2T CPH2399 Stock ROM Firmware is now available for download and You can download it below. by using this firmware you can solve all software Issues within your OnePlus Nord 2T CPH2399 such as hang-on Logo, FRP lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash, etc.

On this page, you will find the direct link to get the official OnePlus Nord 2T CPH2399 Stock ROM Firmware (flash file) on your computer. The Firmware comes as a zip package and contains the original Firmware, Flash Tool, Driver, and How-to Flash Manual.


  • make a backup before the Process
  • it will erase all your data Including Internal Storage

Firmware Information:

  • Device Name – OnePlus Nord 2T CPH2399
  • ROM Type – Full ROM
  • SoC – Mediatek
  • OS – Android 12
  • Password – null
  • Root Access – No
  • Size –
  • Region –
  • Firmware Version – OxygenOS 12.1 A.11

Downloads Links:

OFP Packages:

  • CPH2399_GDPR_11_A.10_220528: Download
  • CPH2399GDPR_11_A.16_2022101218210158: Download

How to Flash OnePlus Nord 2T CPH2399 Stock ROM Firmware Via Realme Flash Tool:

How to use Realme Flash Tool

How to Install EDL Firmware on OnePlus Nord 2T:

  • unpack downloaded Firmware (ofp) using this tool
  • Install Mediatek VCOM driver on Your computer
  • disable SLA Authentication by using this tool (if not disabled You will face a BROM error or flash tool Require a Authorized account/ID)
  • Download & Extract SP tools on your computer
  • from the flash tool folder Run flash_tool.exe
  • set the connection like below image (option/connection)
  • Go to Download tab Click Scatter and load scatter file from ROM folder
  • Select ‘Download only’
  • Click ‘Download’
  • connect Your switched off Phone to computer by using usb cable (press Volume up and down key + Insert usb) (make sure all driver are installed, if no usb VCOM device then you have to do test point)
  • flashing Process started. once done, unplug device & switch it ON

using ROM2box:

  • move all partition images to single folder
  • Run ROM2box.exe
  • Go to Mediatek/Firmware Flasher
  • Select ‘All Partition‘ Option, Locate Firmware folder
  • Click ‘Flash’ button
  • Once the process Started, turn Phone OFF, Now together Press Volume up + down key & Insert USB, Once Phone detected Immediate Release key (make sure your phone stable in device manager)
  • once finished
  • disconnect device
  • again connect device once charging started unplug and Switch it ON

Note: if any issue like ‘file Not found’ then change file format from .img to .bin that all you have to do.

How to Install OTA update:

  • reboot phone to recovery
  • wipe cache
  • click install update, locate file & click Install




Leave A Reply

Please enter your comment!
Please enter your name here