Realme X7 Max RMX3031 Stock ROM Firmware (Flash File)

Realme X7 Max RMX3031 Stock ROM Firmware is now available for download and You can download it below. by using this Realme X7 Max RMX3031 such as hang-on Logo, FRP lock, fast boot Mode, display blank or white after flash, dead recovery, dead after flash, etc.

On this page, you will find the direct link to get the official Realme X7 Max RMX3031 Stock ROM Firmware (flash file) on your computer. The Firmware comes as a zip package and contains the original Firmware, Flash Tool, Driver, and How-to Flash Manual.

Note:

  • Make a backup before the Process
  • It will erase all your data Including Internal Storage

Firmware Information:

  • Device Name – Realme X7 Max RMX3031
  • ROM Type – Full ROM+ OTA’s
  • SoC – Mediatek
  • OS – Android 11
  • Password – romprovider.com
  • Root Access – No
  • Size – 4.1 gb
  • Region –
  • Firmware Version – RMX3031_11_A.15_2021052712090102

Downloads Links:

Flash tools:

USB Driver: 

How to Flash Realme 11x 5G RMX3785 Stock ROM Firmware

How to use the Realme Flash Tool

How to Install Realme X7 Max RMX3031 Stock ROM Firmware:

  • First Disable DAA and SLA Authentication by following this guide
  • Prepare Scatter Firmware by Extracting the ofp File using ofp Extractor
  • Install Mediatek VCOM driver on Your computer.
  • Download & Extract smartphone Flash tools on your computer
  • From the flash tool folder Run flash_tool.exe
  • Go to Download tab Click Scatter and Load Scatter File from ROM Folder
  • Select Download only, Click Download & connect Your switched off Phone by pressing volume up & down key.
  • You can see Flashing Process on screen. after complete unplug & switch it ON

How to Flash/unbrick

Realme X7 Max RMX3031 Stock ROM Firmware

Via Oppo Download tool:

  • Extract ROM File & tool in same folder
  • Install oppo driver on your computer
  • run Oplus Download tool
  • Login with Oppo ID
  • locate firmware ofp file or dir
  • Click start .
  • Connect Phone to computer followed by this Pattern > Volume up + Volume down + USB cable, if no device then you have to do test point..
  • Wait until Success,
  • once done. unplug device and switch it ON.

Related

Leave A Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.