XGody Note 10 Stock ROM Firmware (Flash File)

0

XGody Note 10 Stock ROM Firmware

The XGody Note 10 stock ROM firmware is now available for download, and you can download it below. by using this XGody Note 10, such as hang-on logo, FRP lock, fast boot mode, display blank or white after flash, dead recovery, dead after flash, etc.

On this page, you will find the direct link to get the official XGody Note 10 Stock ROM Firmware (flash file) on your computer. The firmware comes as a zip package and contains the original firmware, flash tool, driver, and how-to flash manual.

Note:

  • Make a backup before the Process
  • It will erase all your data, Including Internal Storage

Firmware Information about the XGody Note 10 Stock ROM Firmware:

  • Device Name: XGody Note 10
  • ROM Type: Full ROM
  • SoC: Mediatek
  • OS: Android 9.0
  • Password: Null
  • Size –
  • Region:
  • Firmware Version:

Download Links for the XGody Note 10 Stock Rom Firmware:

Flash Tools

USB Driver

How to Install Stock ROM On XGody Note 10

  1. Unpack Firmware: after Downloading the firmware from above links extract the zip file using 7z.
  2. Install Mediatek VCOM Driver: Install Mediatek driver on your computer which make a communication between your system and the device you are flashing.
  3. Disable SLA Authentication : next you have to disable serial link authentication to fix any type of flashing error
  4. Run Flash tool: Enter the flash tool folder and run the SPFlashToolV6.exe.
  5. Select Scatter File: In the Download tab, click ‘choose’ in front of scatter-loading file & the Popup windows select scatter file from ROM folder (you have to use latest version of SP Flash tool for XMl Support)
  6. Select Auth File: repeat the same process and select Auth File from ROM File
  7. Download Mode Selection: from the dropdown menu, select ‘Download Only’ option which prevent flash tool to wipe any nvitems.
  8. Initiate Download: Now final step, Click  ‘Download‘ button to start the flashing process
  9. Connect Device: I am assuming that the device already connected, as we connect it during the SLA Disable Process. if the device not connected, hold volume up down button and connect it (make sure it’s in power off mod)
  10. Flashing Progress: once the flashing process started, monitor the yellow flashing process by watching it, Once flashing done, disconnect device, it will start automatically
  11. Setup Device: once the device start successfully setup it by following the screen instructions.

Other Flash Tools

Related