Conquest S21 Stock ROM Firmware (Flash File)

January 5, 2024

Conquest S21 Stock ROM Firmware is now available for download and You can download it below. by using this Conquest S21 such as hang-on Logo, FRP lock, fast boot Mode, display blank or white after flash, dead recovery, dead after flash, etc.

On this page, you will find the direct link to get the official Conquest S21 Stock ROM Firmware (flash file) on your computer. The Firmware comes as a zip package and contains the original Firmware, Flash Tool, Driver, and How-to Flash Manual.

Note:

Make a backup before the Process
It will erase all your data Including Internal Storage

Post Contents

Firmware Information about Conquest S21 Stock ROM Firmware:

Device Name -Conquest S21
ROM Type – Full ROM
SoC –
OS – Android
Password –
Root Access – No
Size –
Region –
Firmware Version –
File Name –

Downloads Links:

CONQUEST_EEA.HB.HDP.VFAZPEAEVQPGYW.20211028.V3.01

Flash Tools:

Sp flash tool

USB driver:

How to Install Conquest S21 Stock ROM Firmware

Unpack Firmware: after Downloading the firmware from above links extract the zip file using 7z.
Install Mediatek VCOM Driver: Install Mediatek driver on your computer which make a communication between your system and the device you are flashing.
Disable SLA Authentication : next you have to disable serial link authentication in order to fix any type of flashing error, you can do it by following this guide
Run Flash tool: Enter the flash tool folder and run the flash_tool.exe.
Connection Configuration – UART 921600: Navigate to the connection settings by clicking option/connection and set the configuration to Bound rate 921600. setup it like the below image
Select Scatter File: In the Download tab, click ‘choose’ in front of scatter-loading file & in the Popup windows select scatter file from ROM folder
Select DA and Auth File: repeat the same process and select DA and Auth File from ROM File
Download Mode Selection: from the dropdown menu, select ‘Download Only’ option which prevent flash tool to wipe any nvitems.
Initiate Download: Now final step, Click ‘Download‘ button to start the flashing process
Connect Device: I am assuming that the device already connected, as we connect it during the SLA Disable Process. if the device not connected, hold volume up down button and connect it (make sure it’s in power off mod)
Flashing Progress: once the flashing process started, monitor the yellow flashing process by watching it, Once flashing done, disconnect device, it will start automatically
Setup Device: once the device start successfully setup it by following the screen instructions.