Realme GT Neo 3 RMX3562 China Stock ROM Firmware (Flash File)

November 3, 2023

Realme GT Neo 3 RMX3562 China Stock ROM Firmware is now available for download and You can download it below. by using this Realme GT Neo 3 RMX3562 China such as hang-on Logo, FRP lock, fast boot Mode, display blank or white after flash, dead recovery, dead after flash, etc.

On this page, you will find the direct link to get the official Realme GT Neo 3 RMX3562 China Stock ROM Firmware (flash file) on your computer. The Firmware comes as a zip package and contains the original Firmware, Flash Tool, Driver, and How-to Flash Manual.

Note:

Make a backup before the Process
It will erase all your data Including Internal Storage

Post Contents

Firmware Information:

Device Name – Realme GT Neo 3 RMX3562 China
ROM Type – Full ROM
SoC – Mediatek
OS – Android 12
Password –
Root Access – No
Size –
Region – China
Firmware Version – RMX3562_11_A.32

Downloads Links:

China:

RMX3562domestic_11_C.19_2023032715300000: Download
RMX3562domestic_11_A.27_2022042922320000: Download
RMX3562domestic_11_A.26_2022042201020000: Download

Flash Tools:

SP Flash tool: Download
ROM2box Full Free: Download

USB driver:

Mediatek USB Driver: Download

How to Flash Realme GT Neo 3 RMX3562 China Stock ROM Firmware

How to Flash Realme GT Neo 3 RMX3562 Via SP Flash tool:

Experimental:

unpack downloaded Firmware using 7zip
Now You have scatter firmware
Install Mediatek Vcom driver on Your computer
disable SLA Authentication by following this Guide (if not disabled You will face a BROM error or flash tool Require a Authorized account/ID)
Download & Extract smartphone flash tools on your computer
from the flash tool folder Run flash_tool.exe
set connection like below image (option/connection)
Go to Download tab Click Scatter and Load Scatter File from ROM folder
Repeat Process and load DA and Auth file too
from drop down Select ‘Download only‘
Click ‘Download’
turn Phone OFF, Now together Press Volume up + down key & Insert USB, Once Phone detected Immediate Release key (make sure your phone stable in device manager)
You will see a Yellow flashing bar with flashing Process. once done, unplug device and switch it ON

Method 2 (No Auth):

Install MTK & usbdk driver on your pc
Run rom2box Go to Mediatek/firmware flasher & open dedicated GUI
connect phone in BROM Mod (you have to do test Point)
once Phone detected in tool go to partition manager
Locate all Partition file one by one from ROM folder
once Ready, Click ‘write partition‘
once done, disconnect device, reconnect once charging started disconnect & Power ON

Related