Realme V11 5G RMX3121 Stock ROM Firmware (Flash File)

Realme V11 5G RMX3121 Stock ROM Firmware

Realme V11 5G RMX3121 Stock ROM Firmware is now available for download and You can download it below. by using this firmware you can solve all software Issues within your Realme V11 5G RMX3121 such as hang-on Logo, FRP lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash, etc.

On this page, you will find the direct link to get the official Realme V11 5G RMX3121 Stock ROM Firmware (flash file) on your computer. The Firmware comes as a zip package and contains the original Firmware, Flash Tool, Driver, and How-to Flash Manual.


  • make a backup before the Process
  • it will erase all your data Including Internal Storage

Firmware Information:

  • Device Name – Realme V11 5G RMX3121
  • ROM Type – Full ROM
  • SoC – Mediatek
  • OS – Android 11
  • Password – rmx3221S
  • Root Access – No
  • Size – 5.3GB
  • Region –
  • Firmware Version – RMX3121_11_A.08_2021042520460121

Downloads Links:

EDL Firmware:

  • RMX3121domestic_11_A.08_2021042520460121:¬†Download
  • RMX3121domestic_11_A.19_2022053109460162:¬†Download
  • RMX3121domestic_11_A.18_2022040814510230:¬†Download

How to Flash Realme V11 5G RMX3121 Stock ROM Firmware Via Realme Flash Tool:

How to use Realme Flash Tool

How to Flash Realme RMX3121 Via SP Flash tool:

  • unpack downloaded Firmware¬†using 7zip
  • Now You have scatter firmware
  • Install Mediatek Vcom¬†driver¬†on¬†Your computer
  • disable SLA Authentication¬†by following¬†this Guide¬†(if not disabled You will face a BROM error or flash tool Require a Authorized account/ID)
  • Download & Extract smartphone flash¬†tools¬†on your computer
  • from the flash tool folder¬†Run flash_tool.exe
  • set connection like below image (option/connection)
  • Go to¬†Download¬†tab¬†Click Scatter¬†and¬†Load Scatter File¬†from¬†ROM folder
  • Repeat Process and load DA and Auth file too
  • from drop down Select ‚ÄėDownload only‚Äė
  • Click ‚ÄėDownload‚Äô
  • turn Phone OFF, Now together¬†Press Volume up + down key & Insert USB, Once Phone detected Immediate Release key¬†(make sure your phone stable in device manager)
  • You will see a Yellow flashing bar with flashing Process. once done, unplug device and switch it ON

Method 2 (No Auth):

  • Install MTK & usbdk driver on your pc
  • Run rom2box Go to Mediatek/firmware flasher & open dedicated GUI
  • connect phone in BROM Mod (you have to do test Point)
  • once Phone detected in tool go to partition manager and locate all Partition file one by one from ROM folder
  • once Ready, Click ‚Äėwrite partition‚Äė
  • once done, disconnect device, reconnect once charging started disconnect & Power ON


Leave A Reply