Redmi Note 12 4G NFC Stock ROM Firmware (Flash File)

August 4, 2023

You can now get the Redmi Note 12 4G NFC Stock ROM Firmware from the link provided below. You can use this firmware to solve all software issues on your Redmi Note 12 4G NFC, such as hang-on Logo, FRP lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash, and so on.

This page contains a direct link to the official Redmi Note 12 4G NFC Stock ROM Firmware (flash file) download page. The Firmware is delivered in the form of a zip file that contains the original Firmware, Flash Tool, Driver, and How-to Flash Manual.

Post Contents

Note:

make a backup before the Process
it will erase all your data Including Internal Storage

Firmware Information

Device Name – Redmi Note 12 4G NFC
ROM Type – Full ROM
SoC – Qualcomm SD685
OS – Android 13
Size – GB
Password – Null
Root Access – No
Region –
Firmware Version –

Downloads Links for Redmi Note 12 4G NFC Stock ROM Firmware:

EDL/Fastboot Firmware:

V14.0.1.0.TMGMIXM Global: Download
V14.0.5.0.TMGRUXM | 13.0 Russia: Download

How to Flash Redmi Note 12 4G NFC Stock ROM Firmware Via MI Flash:

How to use Xiaomi MI Flash Tool

How to Flash Redmi Note 12 4G NFC Via MI Flash:

Download and install Mi Flash Tool on your computer. You can download the latest version of Mi Flash Tool from the above download section.
Download the appropriate Firmware package for your Xiaomi device. Make sure to download the correct firmware package that matches your device model and region
Extract the Firmware package to a folder on your computer
Install Qualcomm usb driver on your computer, You can download the latest version of qualcomm driver from the above download section.
Open Mi Flash Tool on your computer.
Connect your Xiaomi device to your computer using a USB cable. the device must be 9008 EDL Mod
In Mi Flash Tool, click on the “Select” button and navigate to the folder where you extracted the Firmware package in above step.
In Mi Flash tool, click on the “REFRESH” button to detect your device.
Once your device is detected, click on the “Flash” button in Mi Flash Tool to start the firmware flashing process.
Wait for the firmware flashing process to complete. Do not disconnect your device from the computer during this process.
Once the firmware flashing process is complete, you will see a “Success” message in Mi Flash Tool. disconnect device & switch it ON.