Realme Narzo 30 5G RMX3242 Stock ROM Firmware (Flash File)

Realme Narzo 30 5G RMX3242 Stock ROM Firmware is now available for download and You can download it below. by using this firmware you can solve all software Issues within your Realme Narzo 30 5G RMX3242 such as hang-on Logo, FRP lock, fast boot Mode, display blank or white after flash, dead recovery, dead after flash, etc.

On this page, you will find the direct link to get the official Realme Narzo 30 5G RMX3242 Stock ROM Firmware (flash file) on your computer. The Firmware comes as a zip package and contains the original Firmware, Flash Tool, Driver, and How-to Flash Manual.

Note:

  • make a backup before the Process
  • it will erase all your data Including Internal Storage

Firmware Information:

  • Device Name – Realme Narzo 30 5G RMX3242
  • ROM Type – Full ROM+ OTA’s
  • SoC – Mediatek
  • OS – Android 11
  • Password – null
  • Root Access – No
  • Size – 16GB
  • Region –
  • Firmware Version – RMX3242_11_A.08_2021052503020000

Downloads Links:

How to Flash Realme Narzo 30 5G RMX3242 Stock ROM Firmware

How to use Realme Flash Tool

How to Install Stock Firmware on Realme Narzo 30 5G RMX3242:

  • unpack downloaded Firmware using this tool
  • then disable SLA Authentication (if not disabled You will face a BROM error or flash tool Require a Authorized account/ID)
  • Install Mediatek Vcom driver on Your computer.
  • Download & Extract smartphone Flash tools on your computer
  • From the flash tool folder Run Flash_tool.exe
  • Go to Download tab Click Scatter and Load Scatter File from ROM Folder
  • Select Download onlyClick Download & Connect Your switched off Phone.
  • You can see Flashing Process On Screen. after Complete unplug & switch it on

How to Flash/unbrick Realme 8 5G Via Oppo Download tool:

Advertisement
  • Extract ROM File & Download the tool in same Folder
  • Now Install correct driver on PC
  • connect Phone to PC with USB
  • Run Download tool. it will automatically load the Firmware if not then select ofp firmware and then and click start. wait until flashing complete, done. unplug Phone and bootup.

Related

Advertisement

Leave A Reply