Infinix Smart 6 X6511E Stock ROM Firmware MT6761 11.0 (Flash File)

August 19, 2023

Infinix Smart 6 X6511E Stock ROM Firmware is now available for download and You can download it below. by using this firmware you can solve all software Issues within your Infinix Smart 6 X6511E such as hang-on Logo, FRP lock, fast boot Mode, display blank or white after flash, dead recovery, dead after flash, etc.

On this page, you will find the direct link to get the official Infinix Smart 6 X6511E Stock ROM Firmware (flash file) on your computer. The Firmware comes as a zip package and contains the original Firmware, Flash Tool, Driver, and How-to Flash Manual.

Note:

make a backup before the Process
it will erase all your data Including Internal Storage

Post Contents

Firmware Information:

Device Name – Infinix Smart 6 X6511E
ROM Type – Full ROM+ OTA’s
SoC – Mediatek MT6761
OS – Android 11
Password –
Root Access – No
Size – 1.9GB
Region –
Firmware Version – X6511E-H6126EFGM-RGo-GL-220222V487

Downloads Links:

Firmware file Infinix X6511E: Download

How to Flash Infinix Smart 6 X6511E Stock ROM Firmware

How to use Realme Flash Tool

How to Install Infinix Smart 6 X6511E Stock ROM Firmware:

Download & Extract firmware on your computer
Install Mediatek VCOM driver on Your computer
Download & Extract smartphone flash tools on your computer
from the flash tool folder Run flash_tool.exe
Go to Download tab Click Scatter and load scatter file from ROM folder
select Download only. Click Download & connect Your switched off Phone to computer by Pressing volume up & down key (in switch off Mod)
flashing Process started. once done, unplug device & switch it ON

Note: if there is no USB device then you have to check for USB driver or try test Point

How to Flash Infinix Smart 6 X6511E Stock ROM Firmware Via Tecno Flash tool:

Download & Extract Firmware
Download & Extract tecno flash tool
Install Mediatek VCOM driver on Computer
open the tecno flash tool directory and open the ‘Sowtwaredownloadv4‘ folder and Right-Click on ‘SWD_AfterSales.exe‘ and select ‘run as administrator’ click ‘Yes’ wait for the program to Load
click on grey ‘Settings icon’ on the top-Left corner of the screen.
In the Popup Click load & Select MT6XX_Android_scatter.txt File From Firmware Folder
Connect Your Switched of phone to Computer by Pressing volume up & down Key
Click on Green ‘Start Icon’ on the top-left corner of the screen, Now Flashing will Started with a blue Status bar
Once done, flashing bar will turn Green, now disconnect your phone from your computer & Switch it ON.

Related