OnePlus 10 Pro Stock Firmware is useful for fixing issues such as hang on Logo, frp lock, fastboot Mode, display Blank or white after flash, dead recovery, dead after flash etc. for restoring a device to its original configuration. stock ROMs are often specific to a particular device and are not interchangeable between different devices.
OnePlus 10 Pro Specs
The device is powered by Qualcomm SM8450 Snapdragon 8 Gen1 processor, and it is expected to be equipped with the Android 12.1 + ColorOS 12.1 operating system.
OnePlus 10 Pro features a triple camera: 48 MP (wide) + 8 MP (telephoto) + 50 MP (ultrawide) while on the front, there is a 32 MP (wide) sensor.
The display size is 6.7 inches LTPO2 AMOLED. The resolution of the screen is 1440 x 3216 pixels. The device is fueled with a non-removable Li-Po 5000 mAh battery + Fast charging 80W + Fast wireless charging 50W + Reverse wireless charging + USB Power Delivery.
Moreover, it features NFC, A-GPS with dual-band A-GPS, GLONASS, BDS, GALILEO, and USB Type-C 3.1, USB On-The-Go. It is built with a glass front (Gorilla Glass Victus), glass back (Gorilla Glass), and an aluminum frame. It supports Dual SIM (Nano-SIM, dual stand-by).
The sensors include Fingerprint (under display, optical), accelerometer, gyro, proximity, compass, and color spectrum. For the latest phones and tablets,
Pre-Requirement’s
- make a complete backup before process
- charge the device to prevent accidental shut down
Disclaimer:
- flashing May brick your Phone, flash at own risk
Firmware Information: | |
|---|---|
| Device Name: | OnePlus 10 Pro |
| ROM Type: | Full ROM |
| SoC: | Qualcomm |
| OS: | Android 12xx |
| Password: | Null |
| Root Access: | No |
| Region: | Check Below List |
| Firmware Version: | Check Below List |
Downloads Links:
NE2210
NE2210domestic_11_14.0.0.700CN01_2024042300070103
NE2213
NE2213GDPR_11_A.15_2022062303460000
NE2215/NE2211
NE2215export_11_14.0.0.600EX01_2024032619080113
NE2211export_11_13.1.0.597EX01_2023101122280127
NE2217
NE2217export_11_A.08_2022091303210205
Flash tools:
- MSM Download tool: Mirror
usb Driver:
- QCOM 9008 EDL driver: Download
How to Install OnePlus 10 Pro Stock Firmware ROM (Flash File):
SLA Enable device, you have to use official Oplus download tool with a authorized oppo account.. or fastboot with unlocked bootloader
- Extract ROM File & tool in same folder
- Install qualcomm usb driver on your computer
- run Oplus Download tool
- Login with Oppo ID
- locate firmware ofp file
- Click start .
- Connect Phone to computer followed by this Pattern > Volume up + Volume down + USB cable, if no device then you have to do test point..
- Wait until Success,
- once done. unplug device and switch it ON.
How to Install recovery ROM:
you can sideload via stock recovery or use Oneplus local updater
adb sideload 'filename'
Flashing Recovery ROM via Fastboot:
- extract update rom (payload.bin) using payload dumper go
- use fastboot flash in this format
fastboot flash 'partition name' 'filename'
