If you own a Lenovo Yoga Pad Pro AI TB520FU Firmware (Flash File) smartphone and need to install the Lenovo Yoga Pad Pro AI TB520FU stock ROM, you’re in the right place. This guide will provide a step-by-step explanation on how to install the stock ROM/flash file on your device. Whether you’re looking to unbrick your phone or fix a bootloop issue, this article covers everything you need to know.
Lenovo Yoga Pad Pro AI TB520FU Stock Firmware (Flash File)
The Lenovo Yoga Pad Pro AI TB520FU stock ROM Firmware (Flash File) will help you upgrade, downgrade, or reinstall the stock firmware (OS) on your mobile device. Additionally, the flash file (ROM) allows you to repair software issues, bootloop errors, IMEI problems, or even a dead device.
Firmware Information
- Device Name: Lenovo Yoga Pad Pro AI TB520FU
- Android Version:
- Chipset:
- Language: Multi
- Root Access: Not Rooted
- Gapps: Included
File Details
- File Name: Download
- Firmware Version: TB128FU_CN_OPEN_USER_Q00012.0_S_ZUI_13.5.365_ST_220526_qpst
- File Size: 3.62GB
- Required Tools:
How to Install Lenovo Yoga Pad Pro AI TB520FU Stock ROM Firmware (Flash File)
Follow these steps to install the Lenovo Yoga Pad Pro AI TB520FU stock ROM Firmware (Flash File) on your device:
- Install QFIL: Download and install the latest version of QFIL on your computer.
- Download the firmware: Download the firmware file for your from above download section.
- Extract Firmware File: once firmware file is downloaded extract the zip file using the 7z or Winrar.’
- Install Qualcomm driver: download & Install latest qualcomm 9008 usb driver on your computer
- Boot your device into EDL mode: To put your device into EDL (Emergency Download) mode, follow these steps:
- Turn off your device.
- Hold down the volume up and volume down buttons simultaneously.
- While holding the volume buttons, connect your device to your computer via USB cable.
- Your device should now be in EDL mode.
- Note: if still not in EDL Mod then you have to short test point
- Launch QFIL: Launch QFIL on your computer.
- Load the firmware: In QFIL, click on the “Flat Build” button and select the firmware file that you downloaded in step
- in the Programmer option click browse and locate Prog-firehose-ddr.elf file from firmware folder
- Click load xml option and select all rawprogram and patch xmls
- Start the flashing process: Click on the “Download” button in QFIL to start the flashing process.
- Wait for the flashing process to complete: The flashing process can take several minutes to complete, depending on the size of the firmware file and the speed of your computer. do not disconnect your device from the computer during this time.
- Reboot your device: Once the flashing process is complete, disconnect your device from the computer and reboot it.
Finally
This is the complete guide to installing the Lenovo Yoga Pad Pro AI TB520FU stock ROM Firmware (Flash File) on your device. If you have any questions, feel free to use the comment section.
Important Notes:
- Backup Your Data: Flashing the firmware will erase all data. Ensure you back up important files before proceeding.
- Proceed with Caution: We are not responsible for any damage, bootloop, or issues caused by incorrect flashing.
- Battery Requirement: Ensure your device has at least 50% battery to prevent accidental shutdown during the process.
By following this guide, you can successfully install the Lenovo Yoga Pad Pro AI TB520FU stock ROM Firmware (Flash File) and restore your device to its original state.
