Infinix Smart 6 X6511G Stock ROM Firmware MT6761 11.0 (Flash File)

Infinix Smart 6 X6511G Stock ROM Firmware is now available for download and You can download it below. by using this firmware you can solve all software Issues within your Infinix Smart 6 X6511G such as hang-on Logo, FRP lock, fast boot Mode, display blank or white after flash, dead recovery, dead after flash, etc.

On this page, you will find the direct link to get the official Infinix Smart 6 X6511G Stock ROM Firmware (flash file) on your computer. The Firmware comes as a zip package and contains the original Firmware, Flash Tool, Driver, and How-to Flash Manual.

Note:

  • make a backup before the Process
  • it will erase all your data Including Internal Storage

Firmware Information:

  • Device Name – Infinix Smart 6 X6511G
  • ROM Type – Full ROM+ OTA’s
  • SoC –  Mediatek MT6761
  • OS – Android 11
  • Password –
  • Root Access – No
  • Size –  2GB
  • Region –
  • Firmware Version – Infinix_X6511G_MT6761_V234_220124_11.zip

Downloads Links:

  • Firmware file Infinix X6511G: Download

How to Flash Infinix Smart 6 X6511G Stock ROM Firmware

How to use Realme Flash Tool

How to Install Infinix Smart 6 X6511G Stock ROM Firmware:

  • Download & Extract firmware on your computer
  • Install Mediatek VCOM driver on Your computer
  • Download & Extract smartphone flash tools on your computer
  • from the flash tool folder Run flash_tool.exe
  • Go to Download tab Click Scatter and load scatter file from ROM folder
  • select Download only. Click Download
  • connect Your switched off Phone to computer by using usb cable (USB +Volume up and down key) (make sure all driver are installed, if no usb VCOM device then you have to do test point)
  • flashing Process started. once done, unplug device & switch it ON

Related

Leave A ReplyCancel reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.