If you own a UMIDIGI Note 90A smartphone and need to install the UMIDIGI Note 90A Stock ROM Firmware, you’re in the right place. This guide will provide a step-by-step explanation on how to install the stock ROM/flash file on your device. Whether you’re looking to unbrick your phone or fix a bootloop issue, this article covers everything you need to know.
UMIDIGI Note 90A Stock ROM Firmware (Flash File)
The Stock ROM Firmware will help you upgrade, downgrade, or reinstall the stock firmware (OS) on your mobile device. Additionally, the flash file (ROM) allows you to repair software issues, bootloop errors, IMEI problems, or even a dead device.
Download Links
- File Name: UMIDIGI_Note_90A_V2.0_20250116_1724_user
- File Size:
- Download
How to Install UMIDIGI Note 90A Stock ROM Firmware (Flash File)
Follow these steps to install the Stock ROM Firmware (Flash File) on your device:
- Download and install latest usb driver on your computer
- Download and extract UMIDIGI Note 90A’s official firmware on your pc
- Run ‘SPD Flash Tool’
- Click load package & Select .Pac file from the downloaded rom folder
- Click Download/Start Arrow
- Connect your switched off UMIDIGI Note 90A by pressing volume up+ down button at same time using the original usb cable
- Wait until success
Finally
This is the complete guide to installing the UMIDIGI Note 90A Stock ROM Firmware (Flash File) on your device. If you have any questions, feel free to use the comment section.
Important Notes:
- Backup Your Data: Flashing the firmware will erase all data. Ensure you back up important files before proceeding.
- Proceed with Caution: We are not responsible for any damage, bootloop, or issues caused by incorrect flashing.
- Battery Requirement: Ensure your device has at least 50% battery to prevent accidental shutdown during the process.
By following this guide, you can successfully install the Stock ROM Firmware (Flash File) and restore your device to its original state.
