If you own a Swipe Konnect Star Firmware (Flash File) smartphone and need to install the Swipe Konnect Star stock ROM, you’re in the right place. This guide will provide a step-by-step explanation on how to install the stock ROM/flash file on your device. Whether you’re looking to unbrick your phone or fix a bootloop issue, this article covers everything you need to know.
Swipe Konnect Star Stock Firmware (Flash File)
The Swipe Konnect Star stock ROM Firmware (Flash File) will help you upgrade, downgrade, or reinstall the stock firmware (OS) on your mobile device. Additionally, the flash file (ROM) allows you to repair software issues, bootloop errors, IMEI problems, or even a dead device.
Firmware Information
- Device Name: Swipe Konnect Star
- Android Version: Android
- Chipset: Mediatek MT6735M
- Language: Multi-Language
- Root Access: Not Rooted
- Gapps: Included
File Details
- File Name: Swipe Konnect Star Stock ROM/Firmware
- File Size: Varies
- Required Tools:
How to Install Swipe Konnect Star Stock ROM Firmware (Flash File)
Follow these steps to install the Swipe Konnect Star stock ROM Firmware (Flash File) on your device:
Step 1: Download SP Flash Tools
First, download and extract SP Flash Tools inside a folder. Extracting it in C drive ensures better performance.
Step 2: Install VCOM Driver
Download and install the VCOM Driver on your PC. This driver is essential for SP Flash Tools to detect your device. Without it, flashing the firmware won’t be possible.
Step 3: Download the Official Firmware
Select your device from the drop-down menu and download the official Swipe Konnect Star stock ROM file.
Step 4: Extract the Downloaded Firmware
Once downloaded, extract the ROM file inside a folder. Extracting it on the desktop makes navigation easier.
Step 5: Open SP Flash Tools
Go to the SP Flash Tools folder and run the Flash_Tool.exe file.
Step 6: Load the Scatter File
Navigate to the Download tab in SP Flash Tools and click Load Scatter File. A pop-up window will appear—locate the scatter file from the downloaded ROM folder and click OK.
Step 7: Start the Flashing Process
Check all options carefully. If you’re flashing only custom recovery, select Recovery only. Then, hit the Download button.
Step 8: Connect Your Device
Turn off your Swipe Konnect Star and connect it to your PC using a USB cable. Wait until the flashing process is completed. Once done, a green circle will appear, confirming success.
Finally
This is the complete guide to installing the Swipe Konnect Star stock ROM Firmware (Flash File) on your device. If you have any questions, feel free to use the comment section.
Important Notes:
- Backup Your Data: Flashing the firmware will erase all data. Ensure you back up important files before proceeding.
- Proceed with Caution: We are not responsible for any damage, bootloop, or issues caused by incorrect flashing.
- Battery Requirement: Ensure your device has at least 50% battery to prevent accidental shutdown during the process.
By following this guide, you can successfully install the Swipe Konnect Star stock ROM Firmware (Flash File) and restore your device to its original state.
