Download OnePlus Ace 3 Pro PJX110 Stock Firmware ROM (Flash File). If you own a OnePlus Ace 3 Pro PJX110 smartphone and want to download the stock ROM/flash file for it, then you are in the right place. follow the guide below to proceed.
OnePlus Ace 3 Pro Specs
OnePlus Ace 3 Pro has been officially released on July 3, 2024. The size of the display is 6.78 inches LTPO AMOLED with a resolution of 1264 x 2780 pixels and it features 1B colors, 120Hz, HDR10+, Dolby Vision, 1600 nits (HBM), 4500 nits (peak). It features GPS, NFC, Bluetooth 5.3, and USB Type-C 2.0.
It will be powered by the Qualcomm SM8650-AB Snapdragon 8 Gen 3 octa-core processor while the GPU is Adreno 750. It is packed with 12 GB, 16 GB, 24 GB RAM while the internal storage is 256 GB, 512 GB, and 1 TB. OnePlus Ace 3 Pro runs on the Android 14 + ColorOS 14 operating system.
OnePlus Ace 3 Pro features 50 MP (wide) + 8 MP (ultrawide) + 2 MP (macro) on the rear side while on the front, there is a single 16 MP (wide). The smartphone is fueled with Li-Po 6100 mAh + 100W wired, PD2.0, QC2, 1-52% in 15 min, 1-100% in 36 min (advertised). The sensors include under display, optical fingerprint, accelerometer, gyro, proximity, and compass.
| Firmware Information: | |
|---|---|
| Device Name | OnePlus Ace 3 Pro PJX110 |
| ROM Type | Full ROM |
| SoC | Qualcomm 8 Gen3 |
| Operating System | Android 14xx |
Downloads Links:
EDL Files:
- PJX110domestic_11_14.1.0.202CN01_2024060103480000
- password=password
Flash tools:
- Oplus Download tool: Download
usb driver:
- oplus driver: Download
How to Install OnePlus Ace 3 Pro PJX110 Stock Firmware ROM (Flash File):
- Download & Extract ROM
- Install oplus usb driver on your pc
- Download & Extract Oplus Download tool
- Run Oplus Download tool
- Login With OnePlus Service Center Id
- Click Import, browse and select the Firmware folder
- Click ‘Start’ button
- Hold Volume up down and Plug your device to pc using usb cable
- Wait until success./
How to Install recovery ROM:
you can sideload Via stock recovery or local update
-
adb sideload 'filename'
Flashing Via Fastboot:
- extract update rom (payload.bin) using payload dumper go
- use fastboot flash in this format
fastboot flash 'partition name' 'filename'
