Download latest OnePlus Ace 3 PJE110 Stock Firmware ROM (Flash File), This file based on Latest Android update & can be used for unbrick, FRP bypass, boot repair, pattern lock remove, password remove and software fix.
OnePlus Ace 3 has been officially announced on Jan. 4, 2024. The size of the display is 6.78 inches LTPO AMOLED with a resolution of 1264 x 2780 pixels and it features 1B colors, 120Hz, HDR10+, Dolby Vision, 1600 nits (HBM), 4500 nits (peak). It features GPS, NFC, Bluetooth 5.3, and USB Type-C 2.0.
It will be powered by the Qualcomm SM8550-AB Snapdragon 8 Gen 2 octa-core processor while the GPU is Adreno 740. It is packed with 12 GB and 16 GB RAM while the internal storage is 256 GB, 512 GB, and 1 TB. OnePlus Ace 3 runs on the Android 14 + ColorOS 14 operating system.
OnePlus Ace 3 features 50 MP (wide) + 8 MP (ultrawide) + 2 MP (macro) on the rear side while on the front, there is a single 16 MP (wide). The smartphone is fueled with Li-Po 5500 mAh + 100W wired, 1-100% in 27 min (advertised). The sensors include under display, optical fingerprint, accelerometer, gyro, proximity, compass, and color spectrum.
Advantages of Installing Stock ROM
Here are some of the advantages of installing firmware files on your OnePlus Ace 3 PJE110:
- If your device is dead, you can unbrick using the Stock ROM file
- You can fix or repair the IMEI on your device using DB files from Stock ROM
- Remove any malware or Adwares from OnePlus Ace 3 PJE110
- You can fix the boot loop issue on OnePlus Ace 3 PJE110
- Fix Unfortunately, the app has stopped errors on OnePlus Ace 3 PJE110
- Fix Network related issue
- Patch Boot image to Root using Magisk
- You can unroot OnePlus Ace 3 PJE110
- To Reset or Remove FRP on your device:
- Restore OnePlus Ace 3 PJE110 back to Factory State
Readme Once:
[*] Take a Backup: If you are going to flash or install the above Firmware on the OnePlus Ace 3 PJE110 device, then take a backup of everything because your data will be deleted or removed post flashing or installing the Firmware.
[*] We have scanned the above firmware (ROM) package against viruses/malware using Malwarebytes Premium. You can also use Malwarebytes to scan your computer against viruses/malware.
Downloads Links for OnePlus Ace 3 PJE110 Stock Firmware ROM (Flash File)
Firmware Information: |
|
|---|---|
| Device Name: | OnePlus Ace 3 PJE110 |
| ROM Type: | Full ROM |
| SoC: | Qualcomm 8 Gen2 |
| OS: | Android 13xx |
| Password: | Null |
| Root Access: | No |
| Region: | Check Below List |
| Firmware Version: | Check Below List |
OFP /EDL ROMs:
Flash tools:
- Download tool Here
USB Driver:
- Driver Here
How to Install Stock Firmware on OnePlus Ace 3 PJE110:
- Download & Unpack the ROM File & Oplus Download Tool: download latest version of oplus download tool & stock edl firmware, once downloaded extract the firmware and toolhttps://icedrive.net/s/WtS1G15VCDQf2BQG8D915bT5TRzy
- Install Oplus Driver: Download & Install the latest Oplus driver on your computer. This ensures seamless communication between your device and the computer during the firmware installation.
- Launch Oplus Download Tool: open tool folder and run Download-tool.exe on your computer.
- Login Oplus tool: Log in oplus tool using your Oppo ID credentials to proceed with the firmware installation.
- Locate Firmware (ofp) File or Directory: Identify the firmware file (ofp) or directory where it is stored. Make sure to select the correct file for your device.
- Initiate the Firmware Installation: Click on the “Start” button to ‘Start’ the firmware installation process.
- Connect Phone to Computer: Connect your device to the computer using the following pattern: Volume Up + Volume Down + USB cable. If your device is not recognized, perform a test point to establish the connection.
- Wait until Success: allow the installation process to unfold. Be patient and wait until you receive a success confirmation soon.
- Completion and Device Unplugging: Once the installation is successfully completed, disconnect your device from the computer. it will start automatically.
How to Install recovery ROM:
you can sideload Via stock recovery or local update
-
adb sideload 'filename'
Flashing Recovery ROM via Fastboot:
- extract update rom (payload.bin) using payload dumper go
- use fastboot flash in this format
fastboot flash 'partition name' 'filename'
