OnePlus 9RT Stock Firmware is useful for fixing issues such as hang on Logo, frp lock, fastboot Mode, display Blank or white after flash, dead recovery, dead after flash etc. for restoring a device to its original configuration. stock ROMs are often specific to a particular device and are not interchangeable between different devices.
OnePlus 9RT Specs
OnePlus 9RT is powered by Qualcomm Snapdragon 888 processor, and it is expected to be equipped with the Android 12 operating system.
OnePlus 9RT features a triple camera: 50 MP (wide) + 16 MP (ultrawide) + 2 MP (macro) while on the front, there is a 16 MP (wide) sensor.
The display size is 6.62 inches AMOLED. The resolution of the screen is 1080 x 2400 pixels. Oneplus 9RT is fueled with a non-removable Li-Po 4500 mAh battery. Moreover, it features Mobile Hotspot, NFC, A-GPS with Glonass, USB Type-C, Wi-Fi, and the latest version 5.1 Bluetooth.
It is built with a Glass front (Gorilla Glass 5), a glass back (Gorilla Glass 5), and an aluminum frame. It supports Dual SIM (Nano-SIM, dual stand-by). The sensors include fingerprint (under display, optical), accelerometer, gyro, proximity, and compass.
Pre-Requirement’s
- make a complete backup before process
- charge the device to prevent accidental shut down
Must Require:
- backup Your Personal data
Disclaimer:
- flashing May brick your Phone, flash at own risk
Firmware Information: |
|
|---|---|
| Device Name: | OnePlus 9RT |
| ROM Type: | Full ROM |
| SoC: | Qualcomm |
| OS: | Android 12xx |
| Password: | Null |
| Root Access: | No |
Downloads Links:
OFP Packages:
- MT2110domestic_11_C.09_2022122117370138: Download
Flash tools:
- MSM Download tool: Mirror
usb Driver:
- QCOM 9008 EDL driver: Download
How to Install OnePlus 9RT MT2110 MT2111 Stock Firmware ROM (Flash File)
SLA Enable device, you have to use official Oplus download tool with a authorized oppo account.. or fastboot with unlocked bootloader
- Extract ROM File & tool in same folder
- Install qualcomm usb driver on your computer
- run Oplus Download tool
- Login with Oppo ID
- locate firmware ofp file
- Click start .
- Connect Phone to computer followed by this Pattern > Volume up + Volume down + USB cable, if no device then you have to do test point..
- Wait until Success,
- once done. unplug device and switch it ON.
How to Install recovery ROM:
you can Sideload via stock recovery or use Oneplus local updater
-
adb sideload 'filename'
Flashing Recovery ROM via Fastboot:
- extract update rom (payload.bin) using payload dumper go
- use fastboot flash in this format
fastboot flash 'partition name' 'filename'
