OnePlus 9 Pro Stock Firmware is useful for fixing issues such as hang on Logo, frp lock, fastboot Mode, display Blank or white after flash, dead recovery, dead after flash etc. for restoring a device to its original configuration. stock ROMs are often specific to a particular device and are not interchangeable between different devices.
OnePlus 9 Pro Specs
The smartphone is powered by Qualcomm SM8350 Snapdragon 888 Octa-core processor and it comes with 6.7 inches LTPO Fluid2 AMOLED capacitive touchscreen. The resolution of the screen is 1440 x 3216 pixels.
It is protected by Corning Gorilla Glass 5 and features an Always-on display. The device is pack with 8 GB and 12 GB RAM while the internal storage is 128 GB and 256 GB. OnePlus 9 Pro is fueled with a Non-removable Li-Po 4500 mAh battery along with Fast charging 65W, 1-100% in 29 min (advertised).
In addition, it features Fast wireless charging 50W, 1-100% in 43 min (advertised), and USB Power Delivery. It comes in Morning Mist, Forest Green, and Stellar Black colors.
The smartphone features a quad camera: 48 MP (wide) + 8 MP (telephoto) + 50 MP (ultrawide) + 2 MP (depth) while on the front, there is a 16 MP (wide) sensor. Additionally, it features Hasselblad Color Calibration, dual-LED flash, HDR, and panorama.
Pre-Requirement’s
- make a complete backup before process
- charge the device to prevent accidental shut down
Disclaimer:
- flashing May brick your Phone, flash at own risk
Firmware Information: |
|
|---|---|
| Device Name: | OnePlus 9 Pro |
| ROM Type: | Full ROM |
| SoC: | Qualcomm |
| OS: | Android |
| Password: | Null |
| Root Access: | No |
| Region: | Check Below List |
| Firmware Version: | Check Below List |
Downloads Links:
unbrick package:
- EU_OxygenOS_11.2.2.2: Download
- India OxygenOS_11.2.4.4: Download
- Global OxygenOS_11.2.2.2: Download
- T-Mobile OxygenOS_11.2.6.6: Download
Flash tools:
- MSM Download tool: Mirror
usb Driver:
- QCOM 9008 EDL driver: Download
How to Install OnePlus 9 Pro Stock Firmware ROM (Flash File)
- Extract ROM File & tool in same folder
- Install QCOM 9008 usb driver on your computer
- run MSM Download tool
- select other & login
- locate firmware ofp file
- connect Phone to computer followed by this Pattern > volume up + volume down + USB cable, if no device then you have to do test point..
- Click START.
- wait until success,
- once done. unplug device and switch it ON.
How to Install recovery ROM:
you can sideload via stock recovery or use Oneplus local updater
-
adb sideload 'filename'
Flashing Recovery ROM via Fastboot:
- extract update rom (payload.bin) using payload dumper go
- use fastboot flash in this format
fastboot flash 'partition name' 'filename'
