OnePlus 10R CPH2411 Stock Firmware is useful for fixing issues such as hang on Logo, frp lock, fastboot Mode, display Blank or white after flash, dead recovery, dead after flash etc. for restoring a device to its original configuration. Stock ROMs are often specific to a particular device and are not interchangeable between different devices.
OnePlus 10R Specs
OnePlus 10R was officially announced on April 28, 2022. The device is powered by MediaTek Dimensity 8100 Max processor while the GPU is Mali-G610 MC6. The smartphone is equipped with Android 12.1 + OxygenOS 12.1 operating system.
OnePlus 10R features a triple camera: 50 MP (wide) + 8 MP (ultrawide) + 2 MP (macro) while on the front, there is a 16 MP (wide) sensor. The display size is 6.7 inches Fluid AMOLED. The resolution of the screen is 1080 x 2412 pixels and it is protected by Corning Gorilla Glass 5.
The device is fueled with a non-removable Li-Po 5000 mAh battery + Fast charging 80W + Fast charging 150W. Moreover, it features NFC, dual-band A-GPS, GLONASS, GALILEO, BDS and USB Type-C 2.0.
The dimension of the smartphone is 163.3 x 75.5 x 8.2 mm and it weighs 186 grams. The sensors include optical under display fingerprint, accelerometer, gyro, proximity, and compass.
Pre-Requirement’s
- make a complete backup before process
- charge the device to prevent accidental shut down
Must Require:
- backup Your Personal data
Disclaimer:
- flashing May brick your Phone, flash at own risk
Firmware Information: |
|
|---|---|
| Device Name: | OnePlus 10R CPH2411 |
| ROM Type: | Full ROM |
| SoC: | Mediatek |
| OS: | Android 12 |
| Password: | Null |
| Root Access: | No |
| Region: | Check Below List |
| Firmware Version: | Check Below List |
Downloads Links:
OFP Packages:
Full OTA:
Flash tools:
- MSM Download tool: Mirror
How to Install OnePlus 10R CPH2411 Stock Firmware ROM (Flash File)
SLA Enable device, you have to use official MSM download tool with a authorized oppo account.. or fastboot with unlocked bootloader
- Extract ROM File & tool in same folder
- Install Mediatek usb driver on your computer
- connect Phone to computer followed by this Pattern > volume up + volume down + USB cable, if no device then you have to do test point..
- run MSM Download tool
- Login with Oppo ID
- locate firmware ofp file
- Click start .
- wait until success,
- once done. unplug device and switch it ON.
have any question Let Me know via comment.
How to Install recovery ROM:
you can sideload via stock recovery or use Oneplus local updater
-
adb sideload 'filename'
Flashing Recovery ROM via Fastboot:
- extract update rom (payload.bin) using payload dumper go
- use fastboot flash in this format
fastboot flash 'partition name' 'filename'
