How to unbrick Realme X3 Via EDL (Emergency DownLoad Mode)

unbrick Realme X3 is a process to repair a device that was bricked, within Realme X3 users face two types of brick- soft brick and hard brick.

so if your Realme X3 has any soft or hard brick issues then you can fix it by following the below Instructions.

Realme X3 Specs

Realme X3 mobile was launched on 25th June 2020. The phone comes with a 6.60-inch touchscreen display offering a resolution of 1080×2400 pixels and an aspect ratio of 20:9. The display sports Gorilla Glass for protection. Realme X3 is powered by an octa-core Qualcomm Snapdragon 855+ processor. It comes with 6GB of RAM. The Realme X3 runs Android 10 and is powered by a 4200mAh non-removable battery. The Realme X3 supports proprietary fast charging.

Disclaimer:

  • flash at own risk

Status:

  • 100% tested

Preparations to unbrick Realme X3:

Download firmware according to your region

  • Firmware Realme X3: Download
  • Note: extract the zip and then extract ofp using rom2box or py command lines

Download Require tools to unbrick Realme X3:

Download & Install Require USB Driver for unbrick Realme X3:

The process to unbrick Realme X3 via EDL:

  • Run ROM2box.exe
  • Go to oppo & select Realme X3
  • under memory, type select ‘ufs’
  • under firmware, the flasher locates the Main firmware Images folder
  • put Phone to recovery mod, Insert USB cable, multiple times press recovery version from the popup select OK (test point require for dead devices)
  • once you see a Port in the Port detector click the ‘Download’ button.
  • wait until success, it will take around 10 Min
  • once done, Your device restarts itself.. success…

Related

Stay up to date with all the news and updates from your favorite blog on Google News. And of course, you can find us on the rest of RSS: Facebook pagePinterestTwitter, and Flipboard, You can subscribe to our Youtube Channel For Realme Videos. We also work closely with Xiaomi hub which publishes posts about Xiaomi, Redmi and Poco