How to Convert your Chinese Realme RMX3920 into a global model? This guide will walk you through the process . it is a complex process that requires some technical expertise, you can use the existing global firmware to convert your Chines Realme RMX3920 Into a Global Version. Please follow these instructions carefully to avoid any issues.
Main Features:
The smartphone features a big display of 6.7 inches with an AMOLED touchscreen. The resolution is 1080 x 2412 pixels and the screen PPI is 394. The operating system of the device is Android 14 + Realme UI 5.0. The smartphone is powered by a Qualcomm SM7435-AB Snapdragon 7s Gen 2 Octa-core processor and an Adreno 710 GPU.
The internal storage consists of 128 GB, 256 GB, 512 GB which supports 8 GB, 12 GB, 16 GB of RAM. Realme 13 Pro Plus consists of a triple camera: 50 MP (wide) + 50 MP (periscope telephoto) + 8 MP (ultrawide) while on the front, there is a single 32 MP (wide) camera that features LED flash, HDR, and panorama.
The smartphone is fueled with a non-removable Li-Po 5050 mAh battery + 80W wired. The device comes with sensors such as an under-display, optical fingerprint accelerometer, gyro, proximity, and compass. It is available in three colors: Submarine Blue, Navigator Beige, and Explorer Red.
Pre Requirement’s
- platform tools
- windows pc with internet
- Realme RMX3920 Global rom
Note:
- flash at own risk
- make a backup before process
- only suitable for expert, wrong attempt may cause bootloop
How to Flash Global ROM on Realme RMX3920:
- Download & extract firmware
- Download & extract platform tools
- Open cmd in platform tools folder
- Connect your device in fastboot mod
- Send below command
fastboot getvar all
- Note all available partitions
- Now flash all partitions one by one
fastboot flash 'partition' 'filename'
Replace partition with correct partition name and correct filename by file from firmware
Example
fastboot flash boot boot.img
- After flashing all partitions, you can reboot your device
fastboot -w fastboot reboot
