How to Convert OnePlus Pad Pro OPD2404 to Global Model

Are you looking for a way to convert your Chinese OnePlus Pad Pro OPD2404 tablet into a global model? This guide will walk you through the process . it is a complex process that requires some technical expertise, you can use the existing global firmware to convert your Chines OnePlus Pad Pro OPD2404 Into a Global Version. Please follow these instructions carefully to avoid any issues.

OnePlus Pad 2 has been officially released on July 16, 2024. The tablet comes with a 12.1-inch IPS LCD capacitive touchscreen and 2120 x 3000 pixels resolution. It is fueled by a non-removable Li-Po 9510 mAh battery + 67W wired, 64% in 30 min, 100% in 81 min (advertised). The device runs on Android 14, OxygenOS 14.1 operating system and is available in a single color: Nimbus Gray.

It features USB Type-C 2.0, OTG, an accessory connector, and Bluetooth 5.4. The dimension of the device is 268.7 x 195.1 x 6.5 mm and it weighs 584 grams. OnePlus Pad 2 is packed with 8 GB, 12 GB RAM while internal storage consists of 128 GB, 256 GB options.

The tablet is packed with Qualcomm SM8650-AB Snapdragon 8 Gen 3 processor while the GPU is Adreno 750. OnePlus Pad 2 features a 13 MP (wide) camera on the rear side while on the front, there is an 8 MP (wide) camera.

Pre Requirement’s

  1. platform tools
  2. windows pc with internet
  3. Global Firmware for OnePlus Pad Pro OPD2404

Note:

  • flash at own risk
  • make a backup before process
  • only suitable for expert, wrong attempt may cause bootloop

How to convert OnePlus Pad Pro OPD2404 into Global Flash OxygenOS ROM:

  • unlock bootloader of your device
  • download & extract firmware
  • download & extract platform tools
  • open cmd in platform tools folder
  • connect your device in fastboot mod
  • send below command
fastboot getvar all
  • note all available partitions
  • now flash all partitions one by one
fastboot reboot fastboot
fastboot flash 'partition' 'filename'

replace partition with correct partition name and correct filename from firmware

example:

fastboot flash boot boot.img
  • after flashing all partitions, you can reboot your device
fastboot -w
fastboot reboot

Leave A Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.