On this page, you can find the official link to Download Nothing Phone 2a Stock Firmware ROM (Flash File) on your computer. Firmware comes in a zip package containing Flash File, Flash Tool, USB Driver, and How-to Flash Manual.
The size of the device is 6.7 inches OLED capacitive touchscreen while the resolution of the screen is 1080 x 2412 pixels and it is protected by Always On Display. The smartphone runs on the Android 14 + Nothing OS 2.5 operating system while internal storage is up to 512 GB.
Nothing Phone (2a) consists of a dual camera: 50 MP (wide) + 50 MP (ultrawide) camera while on the front there is a single 16 MP camera. The device is available in Black and other colors. The smartphone is fueled with a non-removable Li-Po 5000 mAh battery.
It features Bluetooth 5.3, USB Type-C 2.0, OTG, and GPS. The smartphone is powered by a MediaTek Dimensity 7200 Octa-core processor while GPU is Mali-G610 MC4. It also supports Dual SIM and sensors including under display, optical, fingerprint, accelerometer, proximity, and compass.
Readme Once:
[*] Take a Backup: If you are going to flash or install the above Firmware on the Nothing Phone 2a device, then take a backup of everything because your data will be deleted or removed post flashing or installing the Firmware.
Nothing Phone 2a Stock Firmware ROM (Flash File)
The Flash File will help you Upgrade, Downgrade, or re-install the Stock Firmware (OS) on your Mobile Device. In addition, the Flash File (ROM) also enables you to repair the Mobile device if facing any Software Issue, Bootloop Issue, IMEI Issue, or Dead Issue.
File Name: Nothing_Phone_2a_20240322_OTA.zip
File Size: 3.49 GB
How to Flash (install): Copy the update.zip file to the phone SD and flash it through the stock recovery mode.
How to Flash or Install Firmware (ROM)
- Download and extract the Nothing Phone 2a stock firmware package on the computer.
- After extracting the package, you will be able to get the Firmware File, Flash Tool, Driver, and How-to Flash Guide.
- Install the provided USB Driver on the computer (if the USB Driver is already installed, then SKIP this step).
- Follow the How-to Flash Manual to Flash or install the Firmware on your Nothing Phone 2a device.
